1/4-20 thread GoPro Camera Mount for Flexible & sturdy phone arm

GoPro Camera Mount for Flexible & sturdy phone arm. I remixed this to mount a lazer level that has 1/4-20 thread connection for a tripod. The intent is for this to be used with the Flexible & sturdy phone arm and any camera that has a ¼-20 thread. I combined the mount from tmorris9's model Camera to GoPro mount and the CZFA_FlexFrame_Mount-Mount to desgin this . The final piece you need is the “Tripod_Finger_nut_S” which is directly from the tmorris9 model. You will need a 1/4-20 hex head bolt 1/2" long and a 1/4-20 nut. Print one of each of the 2 parts. Use epoxy to glue the bolt into the main mount, be sure to push it in all the way (screw a nut onto it until dry to hold it tightly in place. Then epoxy the nut into the finger nut but be sure you don't end up with epoxy in the threads. Once the epoxy cures, simply screw the finger nut onto the bolt (open nut side facing the mount) and it's ready to use. Screw the camera onto the bolt until it points the right way, then use the finger nut to tighten the camera down. Now you can attach it to any of your GoPro capable mounts. 13 June 2025: updated the unthreaded version to allow of my space for the ¼-20 bolt