10-inch Rack Mount 2 Pi SSD Internal

Build isn't perfect but you can still print it as is but you may need to shape up the threaded inserts and one of the holes for the ssd sometimes blocks (even though you don't need all of them) I used PLA+ 2.0 by Sunlu to print this on my bambu lab a1. Setting wise I used the standard PLA profile but changed walls to 4 and 40% infill with gyroid infill pattern. You will need m2.5 threaded heat inserts and screws to assembly this I wanted to build this because I kept running into issues with models that either didn't fit a 10 inch rack with side walls or ones where everything is on the front.