13 Series Honeycomb Wall Display Adapter

The 90 & 100% scale only represents the size of the honeycomb inserts, it does not represent the size of the lucky or dummy13 adapter socket. All mounts are designed for regular sized 13 series, besides the 150% mount which is intended for a 13 series scaled up to 150%. There are 2 different adapters. One is just the regular ball socket to snap the back of the figure into place. The other is a rendition of the updated dummy13 stand. It utilizes the upper arm from the new stand. I also created a shortened version of the upper arm so it wasnt sticking out so far from the wall. If you want a longer upper arm just download the orignal. When i printed the honeycomb wall i printed it at 90% because i liked the slightly smaller look. So i had to make the adpater and insert at 90% scale. I included them in the files If you have the standard sized honeycomb wall then download the 100% I also included an insert for a scaled up 13Series figure at 150%. I included mounts for honeycomb walls printed at 100% and 90% scale. If you would like to play around with the files to create your own mounts i will include the blank bas insert. In the files you will find the insert and the hollow piece scaled at 90 & 100%. If you have standard sized Honeycomb Wall then download the 100%. The 90% are for anyone that printed their Honeycomb Wall at 90% scale. The 150% Mount is for action figures scaled up to 150%