1970 pym particle from Avengers endgame

These are caps for the pym particles from 1970 seen in Avengers Endgame. They are made by printing both caps top and bottom, I would recommend shrinking the top cap's height (only height) to 24mm but it will depend on the size of your vial. I used vials from hobby lobby they were roughly 3 in or 76mm. I used water and food coloring to get the liquid effect. I do recommend pushing the cork as far in as possible and sealing it with glue. If you can find a mini ant-man to put in the container before you seal it that would be a cool effect too. These are screen accurate in size and look as far as I can tell. The caps have a snap button on the ends, you could also you a small ball bearing if you can find one. Inside diameter to fit on the little knub is 1/4in. Comments with any questions.