3/4" or 3/8" Seat Jacker for Ford Maverick

This is a WIP. I do not recommend or condone any modification to any safety device in any vehicle, use at your own risk. Should fit quite a few ford vehicles from the same era like Bronco, Ranger, Escape, Explorer etc. You will need a couple of m10x40mm bolts. Use loctite for final fastening, be aware loctite can degrade certain plastics, do not get it on the 3d print. Print with very high wall count and infill percentage with a sturdy heat resistant material. PLA/PETG will not work, I would recommend ASA or ABS ETC.