3/8 Inch Ratchet and Socket Set Rugged Box

Print in PETG or PLA but I recommend PETG since you are likely to get oil on it if you are going to use it for automotive work. I recommend printing the box, lid and latch with “Fuzzy Skin” applied only to contours, I use 0.3mm point distance and 0.1mm thickness. This set is made specifically to fit all of the following items, but other brands may also fit: 1 3/8 Ratchet made by US Pro: https://tinyurl.com/2b58w7x3 , this will probably work for most metal handle 3/8 ratchets in this style with a total length of 20cm. 1 3/8 socket set made by BGS: https://tinyurl.com/3nkm487j 1 wobble extension kit (75mm and 150mm), probably most brands will fit: https://tinyurl.com/55pz5dbj 1 swivel adapter: https://tinyurl.com/mvuc8u5p 1 3/8 to 1/4 adapter: https://tinyurl.com/2s3c84wf 1 3/8 inch bit holder: https://tinyurl.com/ycpztx4z 1 1/4 inch bit holder: https://tinyurl.com/2e6xnhc3 1 1/4 inch handle: https://tinyurl.com/44cehdan 1 bit socket set torx: https://tinyurl.com/434c8e5t , almost any ¼ inch bit sockets should fit. 1 bit socket set hex: https://tinyurl.com/57vymbh4 , almost any ¼ inch bit sockets should fit.