3D Chameleon Auto Clippy For Neptune 4

This is my current AutoClippy modifications / designs to work on my Neptune 4 plus. i have over 1000 filament changes using this system and it has been very reliable. if you wanted it to be more reliable i would recommend adding a filament sensor before the extruder gears. But since I'm stilling running stock Neptune OS i haven't added one. the reason i did this instead of doing tip shaping is because i found with the stock Neptune 4 extruder set up, over 500 changes it would start filling up with little bits of plastic causing inconsistent filament changes. with the AutoClippy all those issues are gone! i have used PETG and i am currently using ABS printed parts. For print settings i just used stock Voron settings, its probably a bit overkill but it seems to work well! I also used auto tree supports. i will show photos of my current slicer settings so you can hopefully get the same results! the STLs should open how i printed them, if not please match the photos I've uploaded. if you have any questions please feel free to ask! i am using this servo https://www.amazon.ca/dp/B07SWW9NDR?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1 i am also using this DC Step Down Converter Voltage Regulator https://www.amazon.ca/dp/B07XXSK68F?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1 ( I have not printed theses parts in awhile, so if somethings don't work please let me know! ) i hope everything works for you!