3D Printed RC Forklift - Improved Carriage & Forks

Added mounting points ( 2 pcs 2.6x6mm screws required) to secure the forks to the bottom of the carriage. This is less "realistic", but saves you from having to adjust them when they get tilted during use. Removed vertical bar pattern from part of the carriage front, and used that space as a pocket for adding weight. This is sized to fit 2x 1/4 oz weights . I don't have these, so I tested with a few coins instead. Note: Carriage should be printed in the same orientation as the original model. Your printer should be able to bridge the gap for the weight pocket easily, but slicers will try to auto generate supports in that area. Be sure to add a support blocker. Remove material from the inner walls of the carriage "rails". This provides more clearance from the spool and mast motor wiring at the bottom, which would sometimes interfere with the carriage.