3D Printer Camera Mount for 7mm build plates

Improved version of my simple camera mount to fix the below camera to the build plate of my CR10 and keep the cable out of harms way. I am using this camera with OctoPrint on my Raspberry Pi 5. I would highly recommend OctoPi to anyone thinking about it. https://www.aliexpress.com/item/1005005249688226.html?spm=a2g0o.order_list.order_list_main.11.3f28180231GSYR It is just clamped to the build plate (7mm thick) using some 25mm Binder/Bulldog Clips. I have updated the design so my CR10 will no longer be able to crash into the camera or the mount. I have butchered the binder clips with an angle grinder to ensure the nozzle and cooling shroud cannot hit this either meaning I have not lost any usable space on my bed. Doing this makes it very difficult to get it onto the bed, but since I don't remove the bed frequently, this isn't an issue for me. I have Printed it in PLA which I'm hoping will last reasonably as the clamping action is done by the metal binder clips. I printed with the text down, without supports as the only 'steep' overhang is a bridge which is then covered up by the clips.