7 Segment Counter, v2.2, Single-Digit

See latest version, v3.0: https://www.printables.com/model/959686-7-segment-mechanical-counter-version-30-ratchet-fo Version 2.2 of the 7-Segment mechanical counter. Improved design. This particular model is a sequential counter (numbers 0 - 9) that receives a linear input to cycle the display. See video here: Quantities of each 3D printed component for a complete assembly: (1) - BODY_v2.1 (for printed screws, updated 5/5/24) (1) - SEG_PLATE (1) - MID_PLATEv2.2 (for countersunk screws, updated 7/10/24) (1) - BACK_PLATE_v2.2 (for countersunk screws, updated 7/10/24) (4) - SCREW_v2.2 (for countersunk screws, updated 7/10/24) (2) - SEG A (2) - SEG B (2) - SEG C (1) - SEG D (2) - FOLLOWER A - (updated 5/23/24, reduced chamfer) (2) - FOLLOWER B - (updated 5/23/24, reduced chamfer) (2) - FOLLOWER C - (updated 5/23/24, reduced chamfer) (1) - CAM A1 - (updated 5/23/24, reduced chamfer) (1) - CAM A2 - (updated 5/23/24, reduced chamfer) (1) - CAM B1 - (updated 5/23/24, reduced chamfer) (1) - CAM B2 - (updated 5/23/24, reduced chamfer) (1) - CAM C1 - (updated 5/23/24, reduced chamfer) (1) - CAM C2 - (updated 5/23/24, reduced chamfer) (1) - CAM D1 (1) - CAM D2 (2) - STACK_GEAR (2) - SYNC_GEAR (2) - SPRING (2) - SPRING_DRUM (1) - PUSH_ACTION_v2.1 - (updated 5/23/24, increased length and diameter of shafts that engage SPRING_DRUM) (1) - PUSHBUTTON Non-3D Printed components: (1) - Type #19 rubber band (2mm x 90mm) (1) - Type #31 rubber band (3mm x 60mm) Material: PLA Layer Height: 0.2mm Supports: No Based on a 0.4mm nozzle ALTERNATE OPTIONS: 2-digit body: https://www.printables.com/model/869296-7-segment-2-digit-mechanical-counter-body-version 3-digit body: https://www.printables.com/model/889859-7-segment-3-digit-mechanical-counter-body-version