A good enough for me fpv solution for the mantadynamics v1

03/14/2026: Didn't like the way the hdzero camera was sticking out the nose so i moved it back on the 14mm back stl. Didn't see a real way to mount fpv camera so i made a good enough for me solution based loosely on the titan/lambda flightworks kestrel fpv cam and vtx mount thing. steps included. 19x19 sorry dji folks. gorilla tape double sided taped the vtx down but you can also run a ziptie around the mount and vtx for good luck. hopefully someone can take their time and make a better one. pics included of analog and hdzero on the mount. use m2 screw self tapping screws in the top and bottom to hold it in or just hot glue it in then screw the nose in and it'll hold that way too and then just use alcohol to unstick the hot glue and pull it out if need be.