A2212 Motor Mount for Chassis 1/10 Adaptable - DKS-Basic by Duke Doks

Update 2024-05-25 - [rear-axis - A2212]: Moved the screw hole on the axle by 1.75mm instead of .8mm to have more space between the motor screws and the gear. Update 2024-05-26 - [rear-axis may2024 update - a2212]: The original rear-axis got updated to include nuts and different wheel-adapters. I added the new axis with the adjusted screw hole. To use this you have to modify your motor. Remove the e-clip and the grub screw holding the motor shaft. Pull the motor apart and push the shaft all the way through. You could also turn the shaft around with the e-clip on the other side but I just dremel'ed a flat spot on each end of the shaft, one for the grub screw and one for the pinion. rear-axis - A2212 is kinda optional since I only moved the screw hole by 0.8mm to align the gears. This remix works without the modified axis but the gears don't align fully.