Accessory Bins for AnkerMake M5, New Type

For M5 C Click Here Update 4/17/2023: v0.04, uniformalized all the drawings. I've also added more tolerance to the magnet pockets from 2mm to 2.20mm Update 4/11/2023: v0.03, Modified height dimensions to accommodate ThisFact's M5 Build Plate Guides (Slim version). Welcome to AnkerMake M5 Bin2.0, this is the latest evolution of the AnkerMake Accessory Bins. In this package, two side bins that can be adhered to the deck of your M5. One tall bin that can be used for trash and refused filament so the material can be collected and recycled. One shallow bin for your favorite scraper, tweezers, and other tools. I've been getting a number requests to add Anker's logo work to the print. Since it's a popular request, I've made point to add it. I will also provide the STLs for inserts if someone wants to print them and populate the emboss in a different color. Other New features of Bin2: New design does not require supports Added 3mm depth to the bins Externally visible footprints (5mm thick) Left Bin has an extension to catch drips. If you're using a side purge, you can scrape it directly into the bin XL Edition bin with ~18x42mm more surface area right up to the gantry Edges of the inside of the bins are chamfered for easier cleaning Footprint still uses 5mm x 2mm disk magnets There will be a few more accessory inserts for the tool holder… In the meanwhile I encourage you to take a look at @lukagra's tool box insert. Included are two footprints to be mounted via 5mm double-sided tape or 3M command strip so that bins will stay in place. The bins also have slots for 5mm diameter x 2mm thick disk neodymium magnets so the bins don't escape from their footprints. I recommend printing one footprint and bin at a time with the logo inserts inside the footprint (see images) so you can assemble them prior to the next print. PLA or PETG, 0.20mm @ 15% Infill - Remove Skirt. These bins (especially XL) are HUGE. These bins should be compatible with the Slim version of ThisFact's M5 Build Plate Guides Update 3/25/2023: Bins v0.01; Original Bin2 file was missing two magnet holes. That's been fixed. Sorry for the inconvenience. Letter Inserts v0.02b; Added more tolerance to the letter inserts for easier assembly.