Acura RSX Group 35 Battery Modification | Tray Spacer

This is a simple battery tray spacer with included installation instructions. The spacer is designed so you don't need to use washers on the battery tie down. You will need a M8x1.25 12mm low profile flat topped cap screw. (the head is 3mm tall) The spacer is also 3mm tall I had an impossible time trying to print it out of Polycarbonate, but if your printer is better I recommend Nylon or PC. However the minimum you should use is ABS or ASA plastic like I did. (mine is printed in black gizmodorks ASA) Should also fit the JDM DC5 Honda Integra.