Additional dice towers

These are additional dice towers using the base towers I made previously. These do fit the dice trays I uploaded with the below designs. https://www.thingiverse.com/thing:7164851 https://www.thingiverse.com/thing:7067478 Tower 3 has a multi-angle bottom ramp. It needs more supports than other options. Tower 4 has a two angle bottom ramp and the internal ramps are modified to reduce forward/backward symmetry. The vertical tower is a different orientation version of tower 4. It has two additional ramps and another central peg. The open tower is a version of tower 4. It's not recommended for 10mm or smaller dice due to the openings. The open tower 2 is a version of tower 4. It's not recommended for any dice under 12mm due to the openings. The open weave tower is a version of tower 4. It's not recommended for any dice under 10mm due to the openings. They are all 125mm x 136 mm x 30 mm. You can add text or images (I've used STL or SVG files). If you add an image as a negative part I recommend not going deeper than 2 mm on the front and 0.5 mm on the back,