Adjustable fixation for (un)original Prusa Drybox

This is a fixation for the (un)original Prusa Drybox to the Prusa enclosure. The fixation is compatible with the hinged lid mod. It holds the drybox in place in the x/y axis and allows to take the drybox apart from the enclosure without the need to unscrew anything. This way the lid can still be opened. The position of the drybox is adjustable. It can be mounted such that it is aligned with the large top-hole of the enclosure. This way, filament from the drybox can directly be fed to the printer. The fixation needs to be screwed to the enclosure using M3x4 screws. There should be plenty of spare screws left from the enclosure. Make sure the screws are not too long, as the lid won't close anymore in that case. Furthermore four feet need to be screwed to the bottom of the drybox.