Adjustable handle for control line model airplanes

A 2 piece handle for an adjustable control line handle. Uses 2 length of #8 threaded rod to attach to an adjustable aluminum bar with adjustable cable. 4 #8 nuts , pressed into adjusting wheels (one "thick wheel" for the internal captured adjuster, and three "thin wheel" for the remainder), are used for fine tuning the overhang of the rod attachment. Threaded rods are set at 5" (127mm) spacing (center to center). Handle is assembled with two 4mm x 10mm and two 4mm x 15mm bolts. Printed in PETG-CF, PETG should work fine.