Airbrush cyclone

This is a rework of my own model from thingiverse (from 2012). “cyclone to catch the spray while purging/cleaning an airbrush.” There may be some sputtering especially with airbrush nozzles bigger than 0.2mm. Prints without supports, a filament/profile with no stringing is recommended. There is now no easy way to remove any stringing from the internal cavity. Version 2.1: Smaller diameter, this seems to be better Added a funnel on the top Tested with an airbrush with 0.4mm nozzle, 2.5bar and plain water. This filters out ~98% of the water.