AM/FM/SW/WX Radio Stand - Echainstar - Clone/Knock-Off of XHDATA D221 (different size)

I built a stand for a pocket radio sold on Amazon by Echainstar aka shenzhenshiqianxingkejiyouxiangongsi. I don't know if that's the brand because there is no brand on the radio. It appears to be a clone or knock-off of the XHDATA D221, with the same bands and frequency coverage (and the addition of a rechargeable battery in addition to using AA cells!) THIS RADIO IS NOT THE SAME SIZE AS THE XHDATA RADIO IT COPIES. That being said, it should be easy to modify the dimensions to fit other small radios, This is one of those analog dial radios with digital tuning that "grabs" signals. It works will, but can be difficult to find the station you want (and if there is a fade it will "grab" a nearby strong signal). I wanted a stand so I could stand the radio vertically without it wanting to tip over. This one holds the radio snugly. If you want a looser fit you may want to just increase the size a few percent in your slicer. The opening is 68 mm x 31 mm / 2 11/16" x 1 3/16". I didn't make the stand very tall so they speaker isn't covered. One idea for a modification would be for a slot on the side so the antenna could be snapped back into the body of the radio.