Ambient Weather Display HSW Mount WS-2902D

I wanted to mount my weather station to my HSW. I found @aiannazzone 's model, where they had already done most of the work. I stripped off the SKADIS clips and added pegs. Works exactly as I wanted! I maintained the flat-side of the original so that it can be printed without supports. This means that you'll need two M3 screws (I used these , the screw head fits perfectly inside the keyholes on the weather station). Copying and pasting some useful text from the original model : This was designed for the display with my WS-2902D kit, but I think it will work with other models. The spacing between the keyholes was 73.5mm. I would print with a brim to ensure good bed adhesion. Required materials: Two M3 screws with heads that aren't too thick. I used M3x6 with 3mm thick heads. That provided a nice tight fit. (As stated above, I used a countersunk head screw)