AMS Lite Wireframe for bag enclosure

A cheap way to protect AMS Lite from dust and moisture is to make an enclosing wireframe and pull a plastic bag over it. You will need 4 pcs of each of 2 parts, and 6 M4 or M5 screws with nuts, and some cable ties or wires. The parts may be printed with PLA in Draft mode with minimal wall thickness and 15%-30% Cube infill, it will give enough stiffness. Two parts #1 and two parts #2 are to be assembled with three screws and nuts to get one half of the wireframe, also the other half. Two halves are put on AMS Mini and tied together. A thick plastic bag can be used as a protective case.