Articulated Chameleon

Articulated Chameleon with movable eyes!! Interchangeable jaw, with or without a tongue. You choose!! No supports required. Just slice and print!! Check my other articulated designs HERE! Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.16 mm Infill: 0% Filament: Several PLA All of them Notes: Depending on your printer and slicer, the fit of the "jaw" or "jaw+tongue" with the head may be too loose or too tight. You can print them a bit smaller or larger with no problems (recommended from 95% to 105%, but can be even more). Post-Printing ============= Eyes After printing, push the eyes until you hear a "click" or "pop" sound. That means now they are free to rotate. It may be hard to move the eyes at the beginning, but they become more free with the use. Jaw / Jaw+Tongue Depending on your printer and slicer, the fit with the head may be too loose or too tight. You can print them a bit smaller or larger as indicated above, or: If the tab is too tight, sand it a little bit. If the tab is too loose, you can "heat and squeeze" it to achieve a better fit. A hairdryer or even a lighter may do the job, and then press lightly with some pliers. Category: Toys & Games