Articulated Minecraft Creeper: Print-In-Place

Articulated Minecraft Creeper: Print-In-Place From the best-selling video game Minecraft. Print-In-Place and fully articulated. Optional face pieces included. Designed in Fusion 360. UPDATE 3/28/2024: Fixed model orientation. Made Head stronger. Default Head rotation +90 deg for single extruder filament swap for new extruded face option (FACE_EXT ver). Modified how built-in supports work, this should allow for easier removal (NO_SUP ver). Added a version that needs support for a better overhang on the upper legs (SUP ver). Printing: NOTE: This model was designed with a .4mm nozzle in mind, other sizes may not work. Printed at .2mm layer height with 20% gyroid infill. DO NOT repair the model , as doing so will remove the custom supports, causing the legs to print fully in mid-air. FOR Creeper_NO_SUP and Creeper_NO_SUP_FACE_EXT Supports are not required, this version will have worse overhangs. DO NOT repair the model; doing so will remove the custom supports, causing the legs to print fully in mid-air. Turn off Detect Overhang Walls. 📷 Image redacted — claim this model to add your own media FOR Creeper_SUP and Creeper_SUP_FACE_EXT Print using supports. Only needed under floating legs, paint-fill overhang. Tree and Snug work well. Clean Up: After printing, the head and legs should snap apart, allowing them to rotate freely. Be careful not to apply too much pressure when releasing the joints. You can also print the optional Creeper face and use super glue to adhere the pieces. 📷 Image redacted — claim this model to add your own media Design Iterations