Avalon Gopro Mount for Hero 6-7

Designed by BH 🛠️ Printing Instructions: 🔧 Print Settings Set nozzle temperature to 220°C. Set bed temperature to 0°C. Turn print cooling off. Use a print speed of 20 mm/s. Set infill to at least 75% for proper strength. 📐 Model Orientation Print the model in the same orientation shown in the attached image. Use tree supports placed directly on the build plate. 🧱 Support Settings Enable a support roof. Set support roof density to 25%. 📏 Additional Settings Set the Z‑seam to 0.8 mm for the cleanest finish.