Bambu Lab A1 Mini - Stand for Scraper, Filament Cutter & Tweezers

📷 Image redacted — claim this model to add your own media Hello Everyone I am sharing the project “Stand for Scraper, Filament Cutter & Tweezers” for the Bambu Lab A1 mini printer. I designed it based on a modification of my other project “Stand For Scraper - Stick and Liquid Glue - Filament Cutter” . I was inspired by the look of the “A1 Mini Scraper and Stylus Holder Bambu Lab” project by @thrutheframe but I didn't use his file to create my model. You can find it on the Maker World website The stand gently covers the printer's ventilation holes. However, it has a cutout at the side that ensures proper air flow from inside the printer. There are cutouts on the left side double-sided adhesive tape. In the lower part of the stand there are holes for 3 anti-slip and anti-vibration silicone pads with a maximum diameter of 8mm. The height of the silicone pad must be 1.5 mm because only then it is perfectly aligned with the bottom of the printer. To get rid of the vibrations of the Scraper and Filament Cutter during printing, you can use 4 pieces of 6x2mm magnets - 2 pieces for the Scraper and 2 pieces for the Filament Cutter. Everything shown in the photo gallery. When you complete the project, please share a photo and a comment. Thank you and have a nice day. To make the project complete, you can download the following two models and buy the matching tweezers : Bambu Lab Scraper - Double Sided Logo : https://www.printables.com/pl/model/453705-bambu-lab-scraper-double-sided-logo Bambu Lab Filament Cutter 45° - Select file version : Filament Cutter Body - Magnets.stl: https://www.printables.com/pl/model/526794-bambu-lab-filament-cutter-45deg Matching Relife ESD-11 Tweezers - Straight Head : https://a.aliexpress.com/_EwlIC9V Here you will find all my modifications and accessories for Bambu Lab A1 Series printers : https://www.printables.com/pl/@Damian27/collections/1547024 For all modifications of my Bambu Lab A1-Mini printers, I used Fiberlogy Easy PLA and Fiberlogy Impact PLA filaments in Gray and Graphite colors. As you can see in the photos, the color is almost 100% consistent with the color of the printer, which makes the modifications look like factory parts. How to Print ? : Material : ANY Layer Height : 0.2mm Infill : 20% Wall Loops : 3 Bottom Layers : 4 Top Layers : 4 Support : No Brim : No