Bambu Lab AMS Small Spool Adapter

This is a remix, designed from scratch, of the great model created by Billie Palmer . It has the following differences: Made it longer, to better support small spools. Added a long support at the bottom side, which touches the bottom of the AMS and stabilizes the adapter. Hollowed the body to use less material and speed the print up. Used a few 45 degree walls so no support is required. I've been using it with 16cm spools but it should work with other sizes (let us know in the comments). Printing Position it as in the STL. PLA or whichever other material. Default Bambu Studio presets work great. The two front bits touching the bed may have a hard time with the printer speeds. You may want to use brim . Installation Remove the back roller from the AMS slot you want to use. You may insert a plastic lever under it to help. Turn the adapter print upside down. Insert the removed roller into the two front hooks. Insert the adapter back-bump in the AMS inside the slot you removed the original roller from. You can now load small spools just like the other ones. Enjoy it!