Bambu Lab - Purge /Flush/Poop bucket for X1 and P1 Series - MAGNETIC Add On

My Bambu X1C vibrates quite a lot which means sometimes the bucket is being pushed away. When that happens I find filament everywhere on the table. That's the reason why I made this Remix. Seeing that I already had a functioning bucket I didn't want to print another one, so I made this Add On / upgrade to add magnets to existing ones. The files have been made with Fusion360. ---------------------------------------------------------------------------------------------------------------- If you want to help me out a bit and see some stuff I made, work in progress, or models before they will be here consider liking and following my Facebook page , thank you very much - it means a lot to me! :) ---------------------------------------------------------------------------------------------------------------- Print with: PLA 3 wall loops 15% infill no supports are needed no brim needed BambuLab_Bucket_AddOn_Short The nut holes should be facing upwards BambuLab_Bucket_AddOn_Long The nut holes should be facing towards the bed Additional stuff: Just glue in your magnets into the cutouts. Different magnet sizes are available. If your's is missing just comment. For assembly refer to the pictures attached. BambuLab_Bucket_AddOn_Short Use the short part as a ruler outside to make drilling easier The little overhang is for easy of drilling BambuLab_Bucket_AddOn_Long Place on even ground The face with the cutouts should be flush with the face of the bucket Drill the middle hole first Secure it with the screw Drill the two outer holes Parts: BambuLab_Bucket_AddOn_Short_d%x%mm as provided BambuLab_Bucket_AddOn_Long_d%x%mm as provided M3x12mm Flathead or count screw 5 pieces 12mm long M3 nut 5 pieces Magnets: I have a bunch of those d5x1mm magnets . Depending on the size of the hole i just put the necessary amount in, that ways the magnets are usable more flexible. Here are some d5x5 magnets . Those are my Amazon ref-links, won't make a difference for you, but helps me :) Updates: none so far ---------------------------------------------------------------------------------------------------------------- I'm looking forward to your comments and makes. :)