Bambu P1P and X1 Sliding Vent Glass Top Enclosure /w ESP8266 LED

Modified Sliding Vent Glass Top Enclosure with ESP8266 and WS2812 LED Strip. Forked from ktothestank 's design and thanks for his good design. I modified the rear left part only based on his (N) Version parts and fixed one ESP8266 board on it. Power supplied by one USB cable with switch. Codes is based on WS2812FX library and just setup your network and IO Pin. You can control the LED strip through webpage to change color or play 55 different effects or customized effect through your codes. Material used: PETG transparent is good for different color show. Diffusers must be transparent materials. Settings: Recommended: 0.2mm layer heights, 3 walls, 10-15% gyroid infill, 4 T/B layers, 75mm/s outside layer speed for better appearance WS2812 library: https://github.com/kitesurfer1404/WS2812FX Basic codes: https://github.com/kitesurfer1404/WS2812FX/tree/master/examples/esp8266_webinterface Other materials: ESP8266 dev board USB power cable (with Switch is better) Prototype board (7*3cm) M2 screws X 4 USB Socket Cables WS2812 LED Strip: 5V, 10mm Wide, 30 pcs/meter, adhesive peel-off backing Felts (1mm thick) adhesive peel-off backing