Bambu X1/P1S Chamber LED Riser (Philips Hue Lightstrip)

Full credit to dkarjadi for the original design and to DuckMeat for the reinforced remix. Why this remix? As I have replaced all the lights in my home with Philips Hue, I also wanted to control the lights on my printer using the same app. I used the remix from DuckMeat as the base model and adapted it for the Philips Hue Gradient Lightstrip. Print Details For my prints I used Bambulabs PLA Matte Black with snug support and 20% grid infill. Basically the standard 0.2mm Bambulab settings. I also glued the individual elements together with cyanoacrylate adhesive before mounting the lightstrip. Lightstrip Installation At a length of approx. 130 cm, there is a mark on the lightstrip, marked by a small triangle. You can cut it at that point. 📷 Image redacted — claim this model to add your own media Once you have attached the light strip to the contour of the riser, you can simply push the cable plug into the rear corner. 📷 Image redacted — claim this model to add your own media And you're done, just add the TPU seals and place everything on top of the printer.