baseus usb c 90 degres cable gap filler

I did this little model to fill the gap between the cable and the port of my switch oled to reduce the wear and tear. It can also work on others devices, it depends on how far the device port is. The model isn't perfect and would you recommend to print it in tpu as I did, I use a thermal pad tape to attach the model to the cable. You might want to adjust the height of the model, depending on your configuration and filament you are using . For the switch oled the height of the model with the tape included should be around 2.05 to 2.2 mm , as long as it click when plugged in it should be good.