"Better" Bambu Lab X1 / X1C / P1P Spool Holder

Allows you to have it aginst a wall and swapping filament without moving the printer. I had a problem with some filament rolls I had, not fitting on the Bambu Lab X1C spool holder. Couldn't find anything that would fit the original holes on the back of the machine and take multiple spool sizes, so I did a mashup of 2 different spoolholders. It will also work as a stand-alone spool holder. * Update 230306: There has been some feedback regarding spools falling of due to the angle of the ftpe tube on some printers (P1P?) that the user magikfly has addressed with a filament guide, https://www.printables.com/model/398686-another-bambulab-filament-guide-arm If you like it or even make one please post it, like, share, and consider a Paypal donation . Thank you! The rollers (80mm) and the pins I used can be found at: https://www.printables.com/model/59013-filament-spool-holder-2021 You will also need the following: 2 M3x20 screws as the originals will be to short. 4 608 bearings for the rollers. Printing instructions Recommendet settings: Material PLA or PETG Layer height: in general 0.2 mm. For the pins 0.15 mm for finer resolved threads Infill: 20% Perimeters: 3 Supports : I printed it without supports and it works well Parts to print: 1 x base, 2 x rollers, and 4 x pins