Big Dumpy Nozzle Park wit da 5th Wheel (.6mm nozzle friendly!)

Started out as a remix to use A1 Mini brushes but I couldn't leave well enough alone. The silicone reservoir now incorporates an ‘on ramp’ made of silicone and it's all secured by a 5th wheel inspired anchor. Versions available for A1 and A1 Mini nozzle brushes! Directions: 1: Fill the entire nozzle park reservoir with high temp silicone and use a toothpick, nozzle cleaner, paper clip, etc… to work silicone into the anchor. * If you are able to smooth the silicone out at this point feel free but I had a hard time getting the silicone to cooperate while it was tacky so I left it alone knowing I could fix it once it cures. * 2: Once the silicone was cured I used a loose utility box cutter blade to carefully cut away any excess silicone. I guided the blade along the edges of the reservoir with a slight sawing motion. ezpz 3: Finally I sanded the front area with 220 grit followed by 400 grit wet dry sandpaper. Entire post processing took less than 5 minutes.