Boeing 747-100 - 1:144

Model description The Boeing 747-100, which was launched in 1966, was the original variant of the Boeing 747. Compared to later versions of the 747, the early Boeing 747-100s only had three windows per side on its upper deck. However, after airlines started converting the upper decks of their Boeing 747-100s from lounges into premium class seating, Boeing not only offered its upper deck on the Boeing 747-100 with ten windows per side as an option, some of the earlier three window per side variants were retrofitted accordingly. Although a freighter version of the Boeing 747-100 was never developed, many passenger Boeing 747-100's were later converted into freighters because of Boeing engineers and Pan Am CEO, Juan Trippe's earlier insight to design the passenger version of the Boeing 747-100 accordingly so that it could be easily remanufactured into a freighter. Boeing built 168 Boeing 747-100s, which includes its iconic prototype, named City of Everett. Assembly note The nose landing gear wheels should be connected using a piece of 1,75 mm filament. Model dimensions Length: 47,8 cm Wingspan: 43,2 cm Print settings Layer height: 0,2mm Outer walls/perimeters: 2 Bottom layers: 3 Top layers: 5 Infill: 0% (except for fuselage fwd.stl, fuselage mid.stl and stand.stl: 25%) Minimum layer time: 5 sec Perimeter generator: classic (not arachne) Minimum required print volume is 81x102x180mm. Please use the following link if you have questions or issues related to this model: https://discord.gg/b4BzJqe6EK Additional content 747-300: https://ko-fi.com/s/a565e447e5 747-200: https://ko-fi.com/s/d60e7a8daa Tilted/extended gear: https://ko-fi.com/s/58262aa0a6 Support If you like my models, you can support my work in the following ways: Make a donation or buy something from my shop: https://ko-fi.com/clerx Become a member of the Clerx Discord community: https://discord.gg/hckHHs3waH