Boeing 747-400 - 1:144

Model description The 747-400 is a wide-body airliner, an advanced variant of the initial 747. The first 747-400 was rolled out on January 26, 1988, and made its maiden flight on April 29, 1988. It typically accommodates 416 passengers in a three-class layout over a 13,490 km range with its 397 t MTOW. With 694 747-400’s delivered over the course of 20 years from 1989 to 2009, it was the best-selling 747 variant. Its closest competitors were the smaller McDonnell Douglas MD-11 trijet and Airbus A340 quadjet. In the late 2010s, older 747-400 passenger aircraft were being phased out by airlines in favor of long-range, wide-body twin engine aircraft, such as the 777, 787, and Airbus A350. Assembly note The nose landing gear wheels should be connected using a piece of 1,75 mm filament. Model dimensions Length: 47,7 cm Wingspan: 44,5 cm Print settings Layer height: 0,2mm Outer walls/perimeters: 2 Bottom layers: 3 Top layers: 5 Infill: 0% (except for fuselage fwd.stl, fuselage mid.stl and stand.stl: 25%) Minimum layer time: 5 sec Perimeter generator: classic (not arachne) Minimum required print volume is 81x102x180mm. Please use the following link if you have questions or issues related to this model: https://discord.gg/b4BzJqe6EK Additional content 747-400F: https://ko-fi.com/s/bd7b8bd4b4 747-400D: https://ko-fi.com/s/84c4af8b9d 747-400M: https://ko-fi.com/s/52406a2585 Additional engine options: https://ko-fi.com/s/b787a75e6d Tilted/extended gear: https://ko-fi.com/s/58262aa0a6 Support If you like my models, you can support my work in the following ways: Make a donation or buy something from my shop: https://ko-fi.com/clerx Become a member of the Clerx Discord community: https://discord.gg/hckHHs3waH