Boeing 747-8 - 1:144

Model description The Boeing 747-8 is a wide-body airliner developed by Boeing Commercial Airplanes, and the largest variant of the 747. After introducing the 747-400, Boeing considered larger 747 versions as alternatives to the Airbus A380. The stretched 747-8 was launched on November 14, 2005, for a market forecast of 300 aircraft. The first 747-8F Freighter performed its maiden flight on February 8, 2010, and the passenger 747-8 Intercontinental followed suit on March 20, 2011. The cargo version was first delivered in October 2011 and the airliner began commercial service in June 2012. Production of the 747 ended in December 2022 with the final 747-8F to be delivered to Atlas Air in early 2023. Assembly note The nose landing gear wheels should be connected using a piece of 1,75 mm filament. Model dimensions Length: 52,2 cm Wingspan: 47,2 cm Print settings Layer height: 0,2mm Outer walls/perimeters: 2 Bottom layers: 3 Top layers: 5 Infill: 0% (except for fuselage fwd.stl, fuselage mid.stl and stand.stl: 25%) Minimum layer time: 5 sec Perimeter generator: classic (not arachne) Minimum required print volume is 82x102x196mm. Please use the following link if you have questions or issues related to this model: https://discord.gg/b4BzJqe6EK Additional content 747-8F: https://ko-fi.com/s/d56817c1c0 Tilted/extended gear: https://ko-fi.com/s/58262aa0a6 Support If you like my models, you can support my work in the following ways: Make a donation or buy something from my shop: https://ko-fi.com/clerx Become a member of the Clerx Discord community: https://discord.gg/hckHHs3waH