Bose Replacment Feet / stand

Feet/stand for Bose speakers, inspired by the 2000s Y2K aesthetic to match the style. Printed in a cheap semi reflective PLA (Amazon PLA). I recommend using variable layer height for the neck part to add a bit more rigidity. However, because of the print orientation, the stress is in the same direction as the layers, so be careful. If you drop it, it will break. Print Settings: • Infill: 15% Gyroid (works well, no need to go higher) • Layer height: 0.24 mm with variable layer height for the bottom of the neck part • Material: PLA • Nozzle: 0.4 mm • Align the seam with the back of the speaker. Support me: Always appreciated, never required. https://ko-fi.com/tonedreams