Breacher Bodykit

This is a kit to make your breacher look a little more scifi. Of course you can mix and match the parts as you see fit, its mostly a cosmetic kit exept for the cheekrest which makes the cheekrest actually able to go to your cheek (it also lines up your line of sight to the ironsights if you install them on the barrelshroud) Theres iron sights and a shell holder for attaching This only fits on the breacher without its little side picatinny rails on the front, so make sure you have the smooth version To install the shroud: Slide the parts on in order (Shroud2 should have the attachment pins further towards the front, the rest should be self explanatory) while adding the bone shaped connectors into the top of the negative rail space. Secure with the 4 attachment pins when the shroud is in place To install the cheekrest: Installs like the old cheekrest, just undo the screws and swap it out To install the thumbhole: Undo all 6 screws in the stock (4 M3 inner Hex, two philips), pull it off and take the stock cap off. Undo the 4 Philips screws in the grip and pull it off. Put the new grip in and screw it down, Put the old stock cap on the new frame part and secure it with the two philips, then put the thumbhole strut on like you see in the picture. then you can attach it to the blaster with the 4 m3 bolts. Last, add the pin through the grip.