Buggy Phone Stand (Print-in-place, Retractable)

A retractable, print-in-place phone stand for the E3D Buggy. Changes the look slightly (and better in my opinion) and a revo on top! Printability: Max overhang is 55 degrees, a well tuned printer should be able to print this in ABS. 2 tolerances are included - high and medium (slightly below 0.2mm and 0.4mm respectively). Uses a sliding mechanism to extend the stand. Print settings: Perimeters: At least 3 Infill: At least 15% Nozzle: 0.4 but should work with 0.6