Caddx Walksnail Ascent "pod", simple and lightweight.

This is a small universal "pod" mount for the Ascent Lite VTX and camera. There's two base plates included, with for use with the stock antenna, and another for typical antennas with a 5mm post. The cutout for the 5mm antenna post may be a little tight depending on what antenna you use. The stock antenna coax lays in the groove in the post and is intended to be secured with a bit of shrink wrap or even a drop of hot glue. Be mindful of the Mipi cable under the top plate so it doesn't get caught between the antenna connector and top plate. It's all sandwiched together using 4 M2x10mm screws. There's holes in the bottom plate for mounting it to a flat surface, or you can use servo tape, Velcro, etc. Enjoy! Get you Ascent Lite Kit here: https://www.caddxfpv.com/products/walksnail-ascent-lite-kit?ref=BFP