Canon F-1 (Original Waist Level Finder)

This is a set of prints for the Canon F-1 (Original) for a 3D Printed Waist Level Finder, there are 2 variants, 1 with a magnifier made from the lens element of a Kodak Brownie Starmite, one with no optical portion. The Prints should be printed short end laying down with the F-1 text facing up. This allows the little notches to be printed properly and they'll flex and lock into place of the F-1. F1_Waistlevel_Finder.stl - that file is the one that has the opening made to fit the Brownie lens. The lens does not straight away fit the lens has little notches in it, they must be shaved off and then it can be pressed into the print. F1_Waistlevel_Finder_No_Mag.stl - This is ready to use right out the gate, print and use. Additionally there 2 variants of a finder cover, Finder Cover 2 is a looser fit, so if you are finding Cover 1 is very tight try that. Now this was made in conjunction with a YouTube Video about the Canon F-1 Feel free to watch that here on the 07 Mar 26. https://youtu.be/thw8DvWBd1E