Carbon Centauri Riser and Storage Upgrade NO STORAGE v1

(This is my first remix so I tried my best, let me know if there are issues please! Not a final design). I liked the original design, but I did not need the storage compartments, just a flat surface to place my filament dryer. This remix replaces the storage compartments with just a flat table top surface and removes the windows on the sides. The glass holder was kept from the original design. The original connectors for the base pin holes are still used, but dovetail connectors were added to the table sides as the original pin holes were removed. There is also an unsplit version if needed. If printing split, I personally printed the pieces on the sides flat and used slim tree supports for less filament. Print time varies around 48 hours or less days depending on print settings. High wall loops/gyroid infill recommended. Epoxy/superglue pieces for more strength. You will need at least 2-3kg filament. Strong filament like PETG/ABS etc recommended.