Case for the CYD with the NM-RF-Hat from NMTech, Bruce Firmware

Case for the CYD with the great NM-RF-Hat from NMTech. A great device which works with the Bruce Firmware. I added some bigger switches and soldered them direct to the board. I made two cases, one with dual colors and just simple one. Please don't forget, it would be nice: https://www.buymeacoffee.com/monduesea The wall holder you can find here: https://www.thingiverse.com/thing:7305473 The stand for this cool thing you can find here: https://www.thingiverse.com/thing:7305469 You need: 1x CYD 2432S028 1x NM-RF-Hat https://de.aliexpress.com/item/1005011692167789.html?gatewayAdapt=glo2deu 2x M3 Brass inserts 6x M2 brass inserts 10x M3x16 counter sunk screws 4x M3x10 Standoff between CYD and NM-RF-HAT 6x M2x4 counter sunk screws 5x on-off Switch 9x4mm 1x On-Off Switch 16mm hole spacing Some doubleside adhesive tape Some hot glue I add some connectors between switchs and board but you don’t need that. The switch description is just printed on paper 20x73mm and covered with a film. Like always, no support, use at your own risk.