Christmas hohoho Sign

Easy to print and fun to make! Perfect for your candy table, coffee table or any corner of your house Specially designed to fit in the buildplate of any mid size printer, like ender 3 or similar. The base is one piece. and every letter and details are separated files so you can print it in different colors with a single nozzle. Designed two styles for every “O”. so you can choose what you like. First "O": choose between santa claus or tree ornament Second “O”: choose between snowman face or snowman body Third “O”: choose between reindeer or christmas elf 📷 Image redacted — claim this model to add your own media split the "Details" file in to parts with your slicer and just print the details you like for each one and glue them on top! 📷 Image redacted — claim this model to add your own media Print Settings Material: PLA / PETG Layer height: 0,28 mm for letters and base. 0.2 for details Nozzle diameter: 0,4mm or 0,6mm Infill: 10 -12% Perimeters: 2 Supports: no Printing Tip the tolerances are a little tight, so make sure you don't have "elephant foot” in your printer to get them to fit right. if you can't avoid it then you just have to scrape or sand the base of each letter a little to make it fit. And if they are a little loose, use some glue to hold them you can check all my original models here: MEAFdesigns | Printables.com ________________________ If you like my designs and want to support me or sell physical prints, you can check out my patreon https://www.patreon.com/meafdesigns ________________________