Classy Stand for Lithophane Full Size Moon Lamp - Solar System Compatible

Model is orientated so the most interesting part of the moon (threaded moon from Solar System ) is front and center. Wire directly in the back. 81mm Tall / 3.2 inches Lamp Kit Wyze Bulbs Recommendations: Easy model to print and looks super classy. Your regular settings should be fine. Here are some recommendations: Print in PLA/PLA+/Pro Layer height: try using Adaptive Layer Height with a layer height set at .15 and get the model to look like my adaptive layer height picture. White is .15 layer height, red is .3 layer height. DOES NOT need to be exact. USE the SMOOTH button in the adaptive layer height settings of your slider Take note where the seam is after slicing. Aligned should work fine. However, if the seam is not nice and straight down the back where the wire hole is, set seam position to BACK and POSITION the base so that the cord hole towards the back of your printer Print Settings No Support required No Brim No Rafts Printing parameters: Resolution: Due to the threads .15 is best. However, Adaptive layer height is even better. Speed + Accuracy Perimeters: .6 nozzle: 2 walls ; .4 nozzle 3 walls Wall Generator: .4 nozzle: Classic; .6 nozzle Arachne Infill: .4 nozzle: 20%; .6 nozzle: 0% Wall Order: .4 nozzle: Inner/Outter/Inner; .6 nozzle: Outter/Inner Supports: no