Commander Deckbox

I've modified all 3 parts, bottom, lid, and latches. The latches I made completely myself so I can print them flat side down and make it really easy to print, it's longer and therefore easier to open, and it also snaps onto the screw quite nicely. The lid was adjusted to have a taper around the entire inside so it doesn't get caught on the corners of your sleeves. The bottom was adjusted to be slightly deeper to also help make sure the lid doesn't catch, and I added little bumps to make the cards lean inwards, again so the lid doesn't catch on cards leaning away from the center. (As you can probably tell, the version I used caught on cards a lot and it annoyed me a lot). It's not perfect, especially with single sleeved or no sleeve cards, with double sleeved the humps work a little better to lean the cards inwards. New updated deckbox bottom: The floor is slanted inwards to again lean the cards away from the opening. Made sideboard area a little smaller, and realized I needed to make it taller to accomodate the now taller angled floor.