Contraceptive ring

OpenScad model for a thermal contraceptive ring. Inspired by the ring made by thorem english link french link Disclaimer If you choose to use this contraceptive ring please note that i'm a stranger on the internet, not a medical professional : Use it at your own risk This kind of contraceptive only works when wore properly (>15h/day) Do not trust the ring, trust the regular spermiogram / seminogram you will be doing every 3 month to ensure you are under the required levels to be considered sterile. Please read some documentation and please contact an association or NGO near you : map of associations , french documentation Using the file attached .stl files are demonstration files and should not be used as is. You should modify the openscad file to you liking and size. Print needs to be sturdy, aim for >25% infill and a nice quality. I do not advice you to directly print the ring even with some soft TPU because it will lack elasticity. Build Material needed : 2 part silicone (buy in hardware store / internet) silicone oil (frequently sold as treadmill belt lubricant) 4 m6 screws + bolts to hold everything together (can be changed in the scad file) For a standard ring you should be aiming for around 25g of silicone and 5% silicone oil making the ring Please do follow instructions from professionals : english link / french link . But to roughly summarize : here are the steps : 1] print the mold (up and down are identical, just print in duplicate. 2] mix the silicone 3] pour the silicone 4] wait 24h 5] Take the silicone out of the mold and heat it