Core One Nozzle Wiper V2 CryoGrip Compatible

I've used the Wiper Path Generator of the V2 Wiper with this coordinates from my printer: X=41 Y=-15 Z=4.5 This is the G-Code I use: G1 X5 Y0 F10000 ; go to safe position G0 X5 Y-14 Z4.0 F10000; G0 X45 Y-19 Z4.0 F10000; G0 X5 Y-14 Z4.0 F10000; G0 X45 Y-19 Z4.0 F10000; G0 X5 Y-14 Z4.0 F10000; G0 X5 Y-10 Z4.0 F10000; G0 X45 Y-10 Z4.0 F10000; G0 X42.675 Y-14.925 Z4.00 F10000 G0 X40.825 Y-19 Z4.00 F10000 G0 X38.975 Y-14.925 Z4.00 F10000 G0 X37.125 Y-19 Z4.00 F10000 G0 X35.275 Y-14.925 Z4.00 F10000 G0 X33.425 Y-19 Z4.00 F10000 G0 X31.575 Y-14.925 Z4.00 F10000 G0 X29.725 Y-19 Z4.00 F10000 G0 X27.875 Y-14.925 Z4.00 F10000 G0 X26.025 Y-19 Z4.00 F10000 G0 X24.175 Y-14.925 Z4.00 F10000 G0 X22.325 Y-19 Z4.00 F10000 G0 X20.475 Y-14.925 Z4.00 F10000 G0 X18.625 Y-19 Z4.00 F10000 G0 X16.775 Y-14.925 Z4.00 F10000 G0 X14.925 Y-19 Z4.00 F10000 G0 X13.075 Y-14.925 Z4.00 F10000 G0 X11.225 Y-19 Z4.00 F10000 G0 X9.375 Y-14.925 Z4.00 F10000 G0 X7.525 Y-19 Z4.00 F10000 G0 X5 Y-19 Z4.0 F10000; G0 X45 Y-14 Z4.0 F10000; G0 X5 Y-19 Z4.0 F10000; G0 X45 Y-14 Z4.0 F10000; G0 X5 Y-19 Z4.0 F10000; G0 X45 Y-14 Z4.0 F10000; G1 Y0 ; go to safe position G1 X125 ; go to safe positionw