Core XZ motormount with knob tensioner v2

The mount was designed to transfer the kinematics from Voron Switchwire to Neptune 3 Pro. Besides that, it is suitable for all ender-3-like printers using corexz/hybridxz kinematics To assemble the mounts, you will need: 2 M4 screw 40 mm or longer 4 M4 nuts 8 M3 screws 35 mm for the motor 4 M3x26 din 912 screws to fasten mototrmount 4 M3*4.5*4.5 heat insert nut 4 M3*8 nuts For mounting to the frame 8 M4 screws (Length depends on the profile) 8 T-nuts Or 8 M5*60 screws (For mounting to the bearing screws of the Neptune 3 Pro frame) If you find any problems during the use of the mount, please write in the comments