Coupler Joint Peg for Ocktron 10" Mini Network Rack

This is a coupler joint peg for the "Ocktron Compact 10‑inch Mini Home Lab Rack 5U by 6U by 8U" by @CarlosByte_3923682. It's designed from the original corner model's male joint. This peg is designed to join two same numbered couplers together into a single long side rail. For each coupler that is joined together, you add 4U in height to the network rack. This peg is a very snug fit. This peg makes the original model very expandable. You'll need 4 pegs for each additional height layer of the rack. 3D Print Profile: (same as the original parts) PETG: for structural strength. Layer height: 0.2 mm Print speed: use standard for optimum results, or 40–60 mm/s (slower for fine details). Wall loops: 4 layers for optimal outer strength. Top layers: 5. Bottom layers: 3. Infill: 20% for optimal quality/strength of the pieces. Brim: not required. BOM: You'll utilize the same #6 3/4 self-drilling screws as the original model.