Crash Derby Armored Benchy

You can't have a game targeted to 3D printing afficionados without a Benchy! While this isn't a very original idea, I do believe I put in the extra effort to make this Benchy feel right at home in the Crash Derby game. Printing Printed using the 0.1mm FAST DETAIL preset, with minor modifications: Layer height: Print the boat and wheels at 0.1mm, base can be done at 0.2 or higher. I also recommend using variable layer height to make the bottom part of the terrain faster to print. Supports: Ideally paint 2 little dots to support the front fenders, but it doesn't look too bad without them. Brim: Recommended. Infill: I used rectilinear to minimize collisions. Assembly There are two versions of the wheels/terrain model, one that should be tight enough to hold the boat above it, and one that is loose and requires glue. There are also two versions of the benchy, one with dents and scuffs, and a clean fresh-out-of-the-factory one, to choose as you see fit.